Manufactured in Greater NoidaGenuine Philips UV-C LampsIIT Patna Alumni on Our TeamExporting to 20+ Countries
Quick Answer
The Alpha UV Drinking Water UV System is a chemical-free Philips UV-C disinfection system for drinking water across all scales — sized 100 to 50,000 LPH, delivering the WHO-standard 40 mJ/cm² UV dose for 4-log inactivation of E. coli, Salmonella, Giardia, Cryptosporidium, and common waterborne viruses. Zero water waste, no taste change, BIS IS 10500:2012 compliant.
Chemical-free UV drinking water disinfection — from homes to municipalities
UV disinfection is the most efficient method for making drinking water microbiologically safe without chemical addition. Alpha UV System drinking water UV systems use Philips UV-C low-pressure UV-C lamps — the preferred lamp type for high-UV-transmittance clear water applications. At 40 mJ/cm², our systems achieve 4-log (99.99%) inactivation of E. coli, Salmonella, Giardia cysts, Cryptosporidium oocysts, and common waterborne viruses in a single pass. Unlike RO, UV wastes no water. Unlike chlorination, it produces no disinfection byproducts and imparts no taste. Our product range spans from compact residential under-sink units to 50,000 LPH systems.
Capacity
100 – 50,000 LPH
SS316L chamber · Philips UV-C lamp
Every Alpha UV System reactor geometry is validated through CFD simulation using ANSYS Fluent. The analysis below shows velocity streamlines and UV dose distribution across the reactor cross-section, confirming that minimum dose targets are met across the entire chamber volume — not just at the chamber centreline.
Turbulence Model
k-ε Realizable
Mesh Elements
~3.2 million cells
Convergence Criterion
Residuals < 10⁻⁴
Every Drinking Water UV ships with genuine Philips UV-C lamps. Not unbranded Chinese alternatives. Philips lamps are rated 9,000–12,000 hours — more than double the life of typical Chinese OEM lamps. A serial number certificate of authenticity is included with every lamp.
Lamp Life
9,000 – 12,000 hrs
UV Output Consistency
±5% over lifetime
Certification
CE · RoHS · NSF
Yes. UV-treated water meets WHO drinking water guidelines and BIS IS 10500:2012 for microbiological safety. UV inactivates 99.99% of E. coli, Salmonella, Giardia, Cryptosporidium, and common waterborne viruses without adding any chemicals to the water.
No. UV is 100% water-efficient — every litre of water entering the UV chamber exits as safe drinking water. RO systems typically waste 3–4 litres for every litre produced. UV is the most water-efficient disinfection technology available.
No. UV disinfects — it inactivates microorganisms but does not remove dissolved chemicals, heavy metals, or salts. For water with chemical contamination, UV is paired with pre-filtration or RO depending on the specific contaminant.
Chlorination adds a chemical residual (which controls regrowth in distribution but produces disinfection byproducts and imparts taste). UV inactivates pathogens with no chemical addition and no byproducts — but provides no residual, so UV is best for point-of-use or point-of-entry treatment, while chlorine is added to municipal distribution.
Explore the specific applications this system is engineered for.
Mon–Sat · 9 AM–6 PM IST · IIT Patna alumni on call
Send us your flow rate and application on WhatsApp — IIT Patna engineers respond in 2 hours.
+91 93183 05878
Get Quote →
Call Direct
+91 95995 00580
Tap to Call →
Send Enquiry
Detailed specifications form
Open Form →
